• 中文简体
  • 中文繁體
  • English
  • Français
  • Deutsch
  • русский
  • 日本語
  • 한국어
  • عربي
  • El español
  • Português
  • ไทย
  • lingua italiana
  • Ελληνικά
  • Nederlands
Your position:Home> Product >Marine airbag>launching airbag

launching airbag

Qingdao Berte Shipping Technology Co., Ltd. mainly produces: launching airbag,marine fender, marine ball, Yokohama fender, inflatable rubber fender, inflatable ball, inflatable bumper, marine airbag, polyurethane floating fender, floating fender, salvage Floating bag, inflatable buoy, buoy, polyurethane buoy.

Keywords: ship launching airbags launching airbag for sale
  • Product Details

Advantages of launching airbag:

1. Saving a lot of construction funds. The use of airbags for upper and lower water is a promising new process. It has changed the way the ship can only be used by slides, floating docks and docks, thus saving the construction of the slides. The large amount of funds invested in the docks and floating docks have greatly reduced the initial investment in the construction of the shipyard.

2. Greatly improve the shipyard's ability to build. Because the traditional water-saving method restricts the shipyard's production capacity, the flexible air-conditioning of the airbag has fundamentally changed the traditional way of using the ship's platform and the dock. It can be built on the ground and then used. The way of launching water, so that the shipyard's ability to build can be greatly improved.

Application areas for marine launching airbag:

1. The shipbuilding industry and the ship repair industry mainly carry out ship safe launching in the shipbuilding industry, and ship the ship safely for repair in the ship repair industry.

2. The construction industry is used to transport very large building structural parts. For example, large-scale reinforced concrete structural members such as bridge piers and wharfs with a weight of more than 1,000 tons, up and down slope displacement, salvage wrecks, stranded rescue, etc.

Compared with traditional skateboard and slide crafts, it has the characteristics of labor saving, time saving, labor saving, less investment, flexibility, safety and reliability. Suitable for all types of ships and construction.

ship launching airbags

  • After Sales Service

    1. The warranty period of our product is two years, so free repair or replacement are available if quality problems occur within warranty period . 2. Responsible for guiding repair and maintenance process; provide repair materials and tools. 3. Guide or participate in the application of product to any project. 4. Free pre-sale, sale, after sale service.

  • How to Repair Marine Airbags?

    (6) Seal the cracks with the thickness of 1mm and the width of the raw rubber strip 1cm larger than the crack. (7) Brush with gasoline and dry it. (8) For longitudinal cracks, first use a width of 10cm cord hanging fabric perpendicular to the direction of the crack to apply a layer. (9) Lay a layer of cord cord fabric in parallel direction. The lap area on the crack should be greater than 5cm, and the corners shoul be made round. (10) Lay a layer of cord cord fabric diagonally. The direction of the cord should be the same as that of the inclined cord in the capsule wall. The surrounding lap should be 1cm larger than that of the previous layer, and the corners shoul be made round.

  • How to Repair Marine Airbags?

    The damage divided into longitudinal cracks, transverse cracks and nail holes. The procedures as bellow : (1) Line the scope needing repair out the boundary of polishing. The scope of repair should be expanded to the surroundings of crack, not miss hidden injuries. The range of extension varies according to the type and the extent of damage. Usually three layers are 18-20 cm; four layers are 20-22 cm; five layers are 22-24 cm; six layers are 24-26 cm. (2) Polish and repair surface until fiber line is exposed,do not damage it. (3) For the longer cracks, cord thread should be used to sew them first. The position of stitch holes is about 2-3 cm away from cracks, the distance between it is about 10 cm. (4) Clean with gasoline and drying them. (5) Apply a layer of mucilage. Mucilage made from raw rubber and soaked in gasoline. The weight ratio of raw rubber to gasoline is 1:5, from raw rubber to gasoline is 1:8. After first layer of glue dry, apply a slightly thickened mortar and dry

  • How to Preserve Airbags?

    1. The preservation of airbags: When the launching air bag is not used for a long time, it should be washed and dried, filled with talcum powder and coated with talcum powder outside, and placed in a dry, cool and ventilated place indoors, away from the heat source. The air bags should be stretched and laid flat, and should not be pressed by heavy objects. Air bags can not be contacted with acids, bases, grease and organic solvents.

  • How to Choose Size and Quantity of Marine Air Bags?

    The sizes and specifications of ship launching air bags should be selected according to the comprehensive information such as ship type, ship's deadweight tonnage, load tonnage, ship length, ship width, berth gradient ratio, tidal change and so on.

  • What is the Maximum working Pressure of Marine Airbags?

    The maximum working pressure of marine airbags depends on the diameter, the number of layers and the working height of the airbags. Not all types of airbags have the same maximum working pressure. The general working pressure range is 0.1MPa-0.35MOa. The specific pressure range should be determined according to the actual situation.

  • How to Pack and Transport Marine Airbags?

    Shipping airbag tray or wooden box transport.

Message BoardPlease write down your question and we will respond to you within 24 hours.
Contact Us More>>
  • Name:Mr. Zuo
  • Phone:86 15066297666
  • Email:fender@beiertefender.com
  • Address:No. 666, Tongji New Industrial Park, Jimo District, Qingdao, Shandong, China