English
  • 中文简体
  • 中文繁體
  • English
  • Français
  • Deutsch
  • русский
  • 日本語
  • 한국어
  • عربي
  • El español
  • Português
  • ไทย
  • lingua italiana
  • Ελληνικά
  • Nederlands
Your position:Home> Product >Marine airbag>jack up airbag

jack up airbag

Qingdao Berte Shipping Technology Co., Ltd. mainly produces: marine fender, marine ball, Yokohama fender, inflatable rubber fender, inflatable ball, inflatable bumper, marine airbag, launching airbag, polyurethane floating fender, floating fender, salvage Floating bag, inflatable buoy, buoy, polyurethane buoy.

Keywords: jack up airbag jack up airbag supplier
  • Product Details

Jack up airbag: At present, in the daily production and life of people, the principle of rolling wood is used in large quantities to carry heavy objects. Therefore, the berte marine airbag is a flexible heavy-duty vehicle designed according to the principle of rolling wood. It is mainly used for water transportation of ships, and at the same time, due to the use of marine airbags. Inflated way to operate, so it has a floating effect, can also be used for the handling of heavy objects, salvage of maritime ships and other purposes.

At present, some marine airbag manufacturers still adopt the lap-type production process. The berte marine airbag mainly adopts the method of integral winding production, so the marine airbag is more reasonable in structure, has greater safety factor and bearing capacity. On the other hand, the berte airbag uses nylon cord fabric instead of canvas to become a new skeleton material, which has better effect and greatly improves the safe carrying capacity of the airbag.


jack up airbag


  • After Sales Service

    1. The warranty period of our product is two years, so free repair or replacement are available if quality problems occur within warranty period . 2. Responsible for guiding repair and maintenance process; provide repair materials and tools. 3. Guide or participate in the application of product to any project. 4. Free pre-sale, sale, after sale service.

  • How to Repair Marine Airbags?

    (6) Seal the cracks with the thickness of 1mm and the width of the raw rubber strip 1cm larger than the crack. (7) Brush with gasoline and dry it. (8) For longitudinal cracks, first use a width of 10cm cord hanging fabric perpendicular to the direction of the crack to apply a layer. (9) Lay a layer of cord cord fabric in parallel direction. The lap area on the crack should be greater than 5cm, and the corners shoul be made round. (10) Lay a layer of cord cord fabric diagonally. The direction of the cord should be the same as that of the inclined cord in the capsule wall. The surrounding lap should be 1cm larger than that of the previous layer, and the corners shoul be made round.

  • How to Repair Marine Airbags?

    The damage divided into longitudinal cracks, transverse cracks and nail holes. The procedures as bellow : (1) Line the scope needing repair out the boundary of polishing. The scope of repair should be expanded to the surroundings of crack, not miss hidden injuries. The range of extension varies according to the type and the extent of damage. Usually three layers are 18-20 cm; four layers are 20-22 cm; five layers are 22-24 cm; six layers are 24-26 cm. (2) Polish and repair surface until fiber line is exposed,do not damage it. (3) For the longer cracks, cord thread should be used to sew them first. The position of stitch holes is about 2-3 cm away from cracks, the distance between it is about 10 cm. (4) Clean with gasoline and drying them. (5) Apply a layer of mucilage. Mucilage made from raw rubber and soaked in gasoline. The weight ratio of raw rubber to gasoline is 1:5, from raw rubber to gasoline is 1:8. After first layer of glue dry, apply a slightly thickened mortar and dry

  • How to Preserve Airbags?

    1. The preservation of airbags: When the launching air bag is not used for a long time, it should be washed and dried, filled with talcum powder and coated with talcum powder outside, and placed in a dry, cool and ventilated place indoors, away from the heat source. The air bags should be stretched and laid flat, and should not be pressed by heavy objects. Air bags can not be contacted with acids, bases, grease and organic solvents.

  • How to Choose Size and Quantity of Marine Air Bags?

    The sizes and specifications of ship launching air bags should be selected according to the comprehensive information such as ship type, ship's deadweight tonnage, load tonnage, ship length, ship width, berth gradient ratio, tidal change and so on.

  • What is the Maximum working Pressure of Marine Airbags?

    The maximum working pressure of marine airbags depends on the diameter, the number of layers and the working height of the airbags. Not all types of airbags have the same maximum working pressure. The general working pressure range is 0.1MPa-0.35MOa. The specific pressure range should be determined according to the actual situation.

  • How to Pack and Transport Marine Airbags?

    Shipping airbag tray or wooden box transport.

Message BoardPlease write down your question and we will respond to you within 24 hours.
Contact Us More>>
  • Name:Mr. Zuo
  • Phone:86 15066297666
  • Email:fender@beiertefender.com
  • Address:No. 666, Tongji New Industrial Park, Jimo District, Qingdao, Shandong, China